Precautions for cleaning and lubrication of stainless steel chain

For ordinary transmission devices, they should not be used carelessly when cleaning at ordinary times, otherwise their use effect will be affected. The general stainless steel chain adopts hyperbolic arc design to reduce friction. It is suitable for occasions with high power and slow running speed.

However, after each use, do not forget to clean the stainless steel chain, especially in rainy days and humid environment. Please wipe the chain and its accessories with a dry cloth; If necessary, clean the gap between the chain pieces with an old toothbrush to remove the sediment and dirt accumulated between the chains.

When cleaning stainless steel chains, warm soapy water can be used, but strong acid or strong alkaline cleaners must not be used, because these chemicals will cause chain damage or even fracture. In addition, do not clean the stainless steel chain with a solvent solution, which will cause damage to the chain.

In addition, organic solvents such as degreasing oil should be avoided when cleaning the stainless steel chain, because this will not only damage the environment, but also clean the lubricating oil of the bearing part.

When talking about lubricants, by the way, emphasize the requirements of stainless steel chains for lubricants.

Lubrication is important for stainless steel chain, so no matter what kind of structural chain is used, reasonable lubrication should be carried out. There are two methods to complete this work: one is direct lubrication, and the other is lubrication after cleaning. The premise of direct lubrication is that the stainless steel chain itself is relatively clean, and sprinkler lubricating oil products can be directly selected for lubrication. The stainless steel chain is more suitable for the dirty chain after cleaning and lubrication.

The above is the precautions for cleaning and lubrication of stainless steel chain. I hope it will help you!